Gas Heating System: Disadvantages and benefits
Today it is one of the most comfy heating systems to set up. Radiators with this type of heating heat up, however not as much as electrical ones, and the heat created goes even more than that attained with electrical heating. In addition to natural gas, it is likewise worth discussing the C diesel heating system, capable of heating relatively big surface areas.
Natural gas heating has actually spread out quickly in current years, particularly in cities. Today it is one of the most comfy heating systems to set up. Radiators with this type of heating heat up, however not as much as electrical ones, and the heat created goes even more than that accomplished with electrical heating. In addition to natural gas, it is likewise worth discussing the C diesel heating system, capable of heating relatively big surface areas. As we have actually seen, there are numerous types of heating.
Honest reviews and advice Boom, Selector and all that welcoming to the days, video, Alright, anyway, what we’re going to do is show you how to fit and hang this column radiator that we’ve got here. Column, radiators are usually heavy they’re lovely to look at Their convection is not poor, really, but they’re. Much more of a modern aesthetic thing to have in your house. That doesn’t mean I like to install them Now, there’s a couple of complicating factors with this job here. Firstly, the customer actually wants this roughly here. Okay, I can use this pipe here for my new TRV on this, but the other part that’s at that end is miles away, so we’re going to have to pull these floorboards up and hopefully we’ll be able to run our pipe up to the new position. So it comes up nice and neat. The other complicating factor is the walls.
The walls here are like my friend’s dog shit, They’re soft they stink and they don’t taste very nice So anyway. The first thing I want to do is take this floorboard up and take the old radiator out of the way I’ve already shut the system down. I’M not an idiot and I’m assuming if you know how to hang or you want to know how to hang one of these. You know you have to drain the heating system down.
It’s very similar to how to hang a bathroom towel rail. There will be a link to that video at the end of this one, And also we’ll put a link on how to drain down a pressurised system. Let going to be bloody mental. Isn’t it, I’ve got our main flow return. Just here. We’ve got our feed into the radiator here and another one there And now we’ve drained down. I can probably cut this roughly back here and we can drill a new hole for a new pipe to come up.
But I’m only going to do that when I’ve hung the new radiator and I know exactly where I want it to go So the next thing I’m going to do is just rip this radiator off – Oh my God. Oh, the wheels on the bus go round and round Round and round round and round The wheels on the bus go round and round All day long.
Now, we’ve disconnected each end. I’ve also put a bit of toilet rodding in each of the holes to stop any black water getting out. We should be able to just lift this off, Oh lovely and out of the way Now all we need to do is remove our old radiator piece, So we’re going to put a new TRV and set our valves on here. You have to spigots like this. That will be what you put into the radiator, Always use Loctite on these and on most threads It’s better than PTFE. Now you put your thumb on here and hold it like that and get your first reel or two just around the front, and then you go up and then you cross cross wiggle it around a bit cross, keep wiggling it and always just crossing and crossing. That’s what locks it in it’s supposed to be a hemp and paste premix. Really, I suppose that’s the best way of describing it
And then just cut your last little bit off with the little cutter Do this to both spigots and then you can wind both of those into the radiator. And then we can look at actually what position we’re going to be. Putting the radiator in going to wind out the old plug here, and then we got this our new spigot to go in here, Get ourselves an adjustable and just knit that Right. So now we’re going to look at the difficult part of this job. Basically, these radiators hang on brackets that sit on the wall. Just like this okay, They’re, very, very simple, brackets a couple of holes in each This particular company have lovingly sent us some brackets already. These are expanding plugs Because these radiators are heavy. You need to make sure you get decent Anchorage here, Especially with one this size. What I’ll, firstly, do is I’ll get my two bottom brackets and I’ll pop ’em here, like that.
Then I’ll know how far apart they’re going to be, And that is 21.5. So I get my pencil out about to give this girl a shout Bracket. Width equals 21.5 For the next bit. You don’t actually have to have the brackets in Cause. We know the centers of the brackets are going to, be the same as the centres for these pipes here, Grab your tape and put down the centre of that pipe there. Sometimes you need a little bit of help. Someone to give you a hand. A helpin’ hand Run it down to the centre of this pipe here. That is 143.2, So now we’ve got height, equals 143.2. Now much in the same way to the towel rail, video and this one you need to decide actually where you want to hang your radiator. Now because we already know our width of the bracket, we can define the centre of the radiator on the wall, divide that by two and measure out from that, and then we know where the widths of our brackets are going to be
When it comes to the height of the radiator, I always start from the bottom. For example, I want my radiator to be 20 centimeters off the floor. You know that your bracket is going to be roughly about a centimetre and a half above the bottom of the radiator. So you measure up 21.5 centimetres Because we’ve already got a pipe here that we’re going to be going on we’ve kind of defined as to where we’re going to put the radiator on with that. So what I now need to do is I need to get my new radiator in line with that pipe down there. So I’m going to mark up where my radiator valve is By that I mean just pop in that in the side of the radiator, then I know how far the width of that has to be away from that first bracket. Let’s do that now. I know that my radiator valve is going to end there, so I also know that the centre of my bracket is here.
So if I measure over from the centre of the pipe to the centre of my bracket, I get a measurement of 11.2, Here’s the pipe I need to go on. I need my centre to be on there, so I pop that on there I measure over 11.2 and Bob’s your uncle. So what I do I just get my spirit level until my bubble is okay, A small line just on there. So now we know where our bracket’s going to be The height I’m going to define we’re going to go at about 28 Grab my spirit level to a nice horizontal line on there. So now we know where our first bracket’s going to be Now. We measure up from here 143.2 all the way to make our mark there to make sure that my spirit level’s in line so they’re not out like that. Then what we need to do is measure across from here 21.5. Centimetres Make sure that they’re both level as well and then check all your levels when you’re finished (jet aeroplane, whistles) Right. What you do is just make one little dot: Tiny ass dot. So no one will notice
If you go slightly wrong, no one can see it Then pull out my spirit, level, tiny dot, just a tiny dot and maybe one below it, And I can see the dot we did a minute ago. That means you put a dash here So now we know that is in line with that one there And we’ll make sure the mark we made earlier on is okay Get that level Now we know that’s where we can put our second bracket Now we measure across From our line here, 21.5, So simple, We do the same at the bottom cause we’re crossing the bottom at 21.5 as well.
Right, so we got our spirit level, that’s set to the right height here and just over the mark. We’ve just made draw a mark there Then the top the same A little mark there And then, if you just want to make sure you’ve got your marks right. Just check it all out with the spirit level There we go, we’ve got our four marks Now I understand what we’ve just been over is long, arduous and pretty boring, but it’s important that you check your measurements, Make sure you’ve got a good spirit level. The one I’ve got is a Stabila, It’s the best And then you’ve just got to make sure that you’ve done everything correct and right Now. The way I’ve shown you just now is slightly strange because we were going off that earlier pipe, But most of you guys are going to, have a centre line. Okay, and you won’t have your pipes there. So what you do, then, is you measure your centre line? Get a horizontal across the bottom measure out to your two bottom brackets, then follow your centre line up and then measure out to your two top brackets, using that centre line.
That’s how you usually do it, But because we’ve got this pipe here, it’s slightly more complicated! So now I’m going to show you how you actually mark up each one of these brackets and then we’re going to drill the wall, and hopefully this wall isn’t going to fall to bits because, as I told you, it’s an absolute mess So we’ll go from here And see how we get on Bob, I pop that on the cross On this round there, one right down there and I’ll do that to the next one just across here And then do that to the two bottom ones Right spot your holes get your drill. This is such a horrible wall. It’s going to go easy here: (motor revs), Just going to pop my hand on here Now I’ll know whether I’ve gone deep enough for my plug. I need to go a tiny bit more
(motor revs), That’s as far as I dare go. So what I’m going to use is the adjustable hole here, just in case I’m just going to run this up tight (motor revs). Ah, that’s great! That is great Not going anywhere Right. So We’ve got ’em all in They’re all level I’ve checked all my widths and everything They all look fine. So it’s now time to hang our radiator up, Put those two to the bottom. There Slide in at the top Pop there we go Well, that looks lovely Check. Our levels – Oh yeah, Oh my God, Yep – that is an absolute beauty. So there we go. Its all done now. It’s hanging on the wall beautifully It’s exactly where he wanted it, and it’s nice and level. I’M going to pipe it up now and I’m going to film that and you can watch that in a second time lapse. Okay,
But very quickly, there’s a cat out there eating and I want to film it eating close up Cause. I’M weird like that. Lets do that now Come on eat your dinner Right. So, there we go Piped up. I’M going to fill it up now. There’s not going to be any leaks cause. I’M amazing, I hope you’ve enjoyed today’s video. I’ve you’ve got anymore questions or you see. We’ve done something wrong or something like that. Let us know in the comments You can also follow us on Twitter and Facebook, as you know So remember. If you’ve got any questions, ask us and we will hopefully answer them in Ask a Plumber for you. I hope you’ve enjoyed today’s video. I hope you’re going to come back and watch some more
I hope you like column radiators and you think they’re amazing, And I hope that you have a lovely weekend if it is the weekend when we actually do this. So whatever weekend comes up after this, I hope you have a lovely one Yeah. I hope it doesn’t rain. I fear the latter. People Hold tight, , Honest reviews and advice..
Before the arrival of the cold, it is important that our home has a good heating system, and the installation of one system or another is something to keep in mind if you are going to do reform.
When deciding which type of heating suits you, you have to take into account several factors, such as which one consumes more or less, also, if you need it, it is advisable to know the type of boiler to be installed.
Gas heating: its advantages and disadvantages
Natural gas heating has spread rapidly in recent years, especially in cities. To install this type of heating, in addition to radiators, a boiler must also be installed.
Today it is one of the most comfortable heating systems to install. Of course, its installation is a bit complicated since it is necessary to mount a circuit of tubes connected to a boiler, and this circuit will have to circulate the water, which, when heated (thanks to the boiler), is responsible for producing heat. When the liquid runs cold, it goes back into the boiler to heat up again.
Radiators with this type of heating heat up, but not as much as electric ones, and the heat generated goes further than that achieved with electric heating. Of course, it is recommended that in large rooms, more than one radiator be installed.
The type of boiler installed influences the generation of heat with this system. The more powerful, the more heat it will generate. When in doubt about what is needed, it is always best to consult with an expert.
Among its drawbacks is the fact that to install it you have to do bigger work.
In addition, its maintenance and installation costs should not be forgotten either.
In addition to natural gas, it is also worth mentioning the C diesel heating system, capable of heating fairly large surfaces. It is usually used in small towns and in independent houses, but this is where its advantages come from, since the fuel used to generate the heat must be stored and, therefore, it is necessary to have a fairly large tank. Every once in a while, you have to worry about filling it up, and it is pretty dirty energy because it generates a lot of waste.
As we have seen, there are several types of heating. The choice will depend on your personal circumstances, those of your home, and the reform you have planned, but remember that if you are not clear, the experts from a reformed company like us will help you analyze the heating needs of your home to plan the reform.